No official torrent yet — requesting it tells the flock what to host next. You cannot seed a catalog-only page.
Cataloged from Jackrong/Qwopus3.8-27B-Flash-GGUF
All models by Jackrong →
[!NOTE] Qwopus3.8-27B-Flash is a fine-tuned model built on Qwen3.8-27B. It is designed to retain strong general capability while substantially lowering reasoning cost and response time for practical, long-running agent workloads.
[!TIP] 12.8% Faster Decoding · 80.7% MTP Acceptance · Less Runaway Reasoning · More Efficient Agent Completion
[!WARNING] Known Issue
In some specific Python coding tasks, the model may occasionally generate code with incorrect indentation. A fix is currently in progress.
This issue is limited to Python code indentation in certain cases and does not affect the model's other capabilities or overall performance.
Qwopus3.8-27B-Flash starts from a simple premise: a useful Flash model should preserve enough capability to complete demanding work while driving down the cost and latency of reasoning.
An agent amplifies reasoning cost. A normal chat may call a model once, but one agent task can call it dozens or hundreds of times through a repeated loop:
[!IMPORTANT] Wall-clock time is what users feel. If a model adds five seconds to each turn, a 50-turn task adds 250 seconds of waiting. In the agent era, every-token speed, reasoning length, and completion efficiency are as important as a single-turn benchmark result.
Inference cost is also a central commercialization constraint. Every generated token consumes GPU time, electricity, memory capacity, and concurrency budget. Flash models are intended to give users with constrained resources a more practical experience, not merely to produce a higher throughput number on paper.
The goal of Qwopus3.8-27B-Flash is therefore to reduce ineffective computation and reach a clean completion more quickly and consistently. The benchmark results below show that this optimization has an explicit trade-off: it improves inference efficiency, while the reported MMLU-Pro mixed-set score is lower than the base comparison.
[!NOTE] These visuals are qualitative model outputs. They complement the measured benchmark results below and are not a quantitative capability score on their own.
Qwopus3.8-27B-Flash is fine-tuned from the Qwen3.8-27B foundation model. The training objective is not simply to maximize visible reasoning length or claim a universal benchmark gain. It is to retain practical problem-solving ability while making the model faster, less prone to pathological long-tail reasoning, and better suited to iterative agent workflows.
Data preparation is the foundation of the SFT stage. The first stage began with approximately 1.5 million teacher-model SFT examples. After extensive cleaning and filtering, the highest-quality 10% was retained for the initial fine-tuning stage.
Each example was evaluated across its three main components—question, chain of thought, and answer—with criteria tailored to a 27B model:
The evaluation ensemble used reasoning models including Qwen3.7-Max, GLM-5, GPT-OSS-120B-High, and Gemma4-27B. Their scores were combined through a weighted calculation, after which only high-quality examples were retained.
[!NOTE] The training mix also includes agent-trajectory data and reconstructed trace data derived from closed models such as Claude and GPT. Detailed examples cannot currently be disclosed. The dataset will be further organized and released after preparation is complete.
Stage 2 consolidates and strengthens the chain-of-thought and reasoning behaviors learned during SFT. This stage follows an NVIDIA NeMo-RL + GSPO route for reasoning reinforcement.
The training process uses repeated sampling and reward comparison, then updates the model with a sequence-level importance ratio. The intent is to reinforce useful reasoning trajectories and completion behavior rather than reward longer reasoning traces by default.
[!TIP] The two stages serve different roles: Stage 1 builds a high-quality reasoning and instruction-following foundation; Stage 2 consolidates it through reward-guided reasoning reinforcement.
Special thanks to Unsloth for its efficient, memory-optimized fine-tuning framework. Its tooling made the large-model training workflow more practical and accessible.
Special thanks to Kyle Hessling for completing the testing work and providing essential evaluation support for this release.
[!TIP] If you have any questions or suggestions about the model, please feel free to reach out to Kyle Hessling on X and share your feedback. Thank you so much for all your support! 🙏
[!NOTE] The training and test results in this card are author-provided local results. The sections below describe the measured scope and do not claim universal behavior across all hardware, prompts, or agent environments.
[!WARNING] ⚠️ Known Issue
In some specific Python coding tasks, the model may generate code with incorrect indentation. A fix is currently in progress.
This issue is isolated to Python code indentation and does not affect the model's other capabilities.
The reported local tests used inference environments that included NVIDIA GeForce RTX 5090, NVIDIA V100, and NVIDIA GB10 hardware. The current test brief does not map every table or case study to a particular device.
For the MMLU-Pro decoder-only comparison, both models used the same Q5_K_M + MTP configuration:
The agentic software-engineering battery in Section 4.6 is a separate run explicitly reported on one RTX 5090 and uses its own configuration, listed with that battery.
[!WARNING] Accuracy–efficiency trade-off: The fine-tuned model improves reasoning efficiency, but its reported score on the 2,500-question MMLU-Pro mixed set is 91.28%, compared with 92.73% for the Qwen3.8 base comparison—a decrease of 1.45 percentage points. The decoder-only throughput results below measure speed, not answer accuracy.
This table measures isolated generated-token throughput rather than answer accuracy. Evaluation time is in seconds; throughput is generated tokens per second.
Across the three reported subjects, Qwopus reaches 9.35 tok/s versus 8.28 tok/s when rounded to two decimals. Every reported subject shows a double-digit decoder-only throughput gain. The separately reported ~8% end-to-end batch-throughput result includes the full evaluation path and should not be combined with this decoder-only measurement.
Draft acceptance is an internal llama.cpp/MTP implementation metric. The reported aggregate is a weighted calculation, rather than an average of subject-level percentages:
[!TIP] The +14.6 pp result is an absolute difference in percentage points. It is not a +14.6% relative-improvement claim.
The following values are raw_output character counts, not token counts. Mean, P95, and median describe different parts of the output-length distribution.
The reported data suggests that Qwopus reduces pathological long-tail reasoning while retaining sufficient reasoning depth on typical samples. P95 output length falls by 13–40% depending on subject, while median output length increases in all three subjects. This pattern suggests less runaway reasoning rather than uniform suppression of reasoning.
This held-out battery evaluates 14 agentic software-engineering tasks with deterministic hidden-test verifiers. There is no LLM-as-judge and no partial credit: a task passes only when its complete hidden suite passes. Before evaluation, every task was checked with negative and positive controls—the untouched starting state had to fail, and a reference solution had to pass. Hidden tests remain outside the agent workspace and are SHA-256 hashed before and after each run to detect tampering.
[!IMPORTANT] Strict result: 13 / 14 passed (93%). The 95% Wilson confidence interval is 69%–99%. Total wall-clock time was 26.0 minutes on one RTX 5090. A task counts only if the agent both passes its hidden suite and finishes within its per-task wall-clock budget.
The battery used Qwopus 3.8 27B in Q5_K_M GGUF format with a bundled NextN/MTP head, self-speculative decoding (--spec-type draft-mtp), q8_0 KV cache, and thinking disabled. It was run through headless Claude Code against a local llama.cpp server with real file and shell tools.
T07 left a file that passed its hidden suite (7 passed in 0.01s), but the agent kept iterating and did not return before the 420-second limit. It is therefore correctly scored as a strict failure: completing the task includes knowing when to stop. This was a termination and verbosity failure, not necessarily an inability to implement the parser.
[!WARNING] Sampling is stochastic. Only T07, the failing task, was resampled; the other 13 tasks are single-sample passes. The 13/14 headline is therefore a one-draw capability demonstration, not a stable leaderboard number, and is more likely optimistic than pessimistic. A stable estimate requires multiple seeds for every task.
These are individual reported workload case studies, not aggregate success rates or universal behavior claims.
In this reported workload, the base comparison generated more tokens and spent more time but did not complete, while Qwopus completed with fewer turns and fewer generated tokens.
This case illustrates a reported valid long-form completion without hitting the token ceiling and with less reported internal reasoning. It does not establish that every web- or code-generation task will show the same ratio.
[!IMPORTANT] These case studies are workload-specific evidence. They must not be converted into a general pass rate, API reliability guarantee, or claim that Qwopus is universally faster or more capable.
Special thanks to:
Read → Think → Tool Call → Observe → Edit → Testdraft_n_max = 2-c 327680-np 10sum(accepted) / sum(generated)