lued/Qwen3.8-27B-INT8-W8A16-MTP

Generation throughput is the per-request decode rate with MTP enabled and varies by workload, since draft acceptance is prompt-dependent. Prefill and TTFT are governed by the 8,192-token batched-token cap, which chunks long prompts and interleaves the MTP draft pass; TTFT grows with prompt length, roughly linearly past 32K.

Multi-stream throughput is not yet published: concurrent requests can intermittently crash the engine on this pin, so parallel benchmarks will be added once a vLLM release containing vllm#50021 is available (see the concurrency note under Serving).

Quantization fidelity

The KLD result measures checkpoint-weight drift over 4,563 teacher-forced positions. It is not a functional quality score; tool use, JSON-schema compliance, coding, multimodal quality, and long-context recall require separate behavioral evaluation.

Checkpoint profile

Why W8A16 on Ampere

RTX 3090 GPUs are Ampere sm_86. They do not provide the native FP8 tensor-core execution path available on newer GPU generations. In this deployment, FP8 weight-only and INT8 W8A16 checkpoints both reach Marlin-family weight-only kernels that reconstruct weights for 16-bit GEMMs.

W8A16 is therefore the better fidelity default here: it preserves eight integer bits with group-wise scaling while retaining the same practical decode class as FP8-Marlin on these GPUs.

Why not AutoRound?

This checkpoint uses llm-compressor's QuantizationModifier, not AutoRound. At W8A16, AutoRound's installed RTN configuration disables optimized RTN by default for efficiency, and the measured KLD is already below 9e-4 nats/token. Re-encoding these weights with AutoRound would add a new export and serving path without evidence of a meaningful quality gain.

Quantization design

Architecture audit

The BF16 source was checked before quantization against the preceding Qwen3.6 structural contract:

• 64 language layers: 48 Gated DeltaNet linear-attention layers and 16 full-attention layers.
• Hidden size 5,120; intermediate size 17,408; padded vocabulary 248,320.
• One MTP layer with the same 15 top-level mtp.* tensors.
• Stable GDN projection names: in_proj_a, in_proj_b, in_proj_qkv, in_proj_z, and out_proj.
• The only relevant rename was non-Linear convNd → conv1d, outside the quantization target.

The pre-quantization structural audit completed successfully before any weights were modified.

Recipe

The result contains 400 quantized Linear GEMMs: 192 MLP projections, 64 full-attention projections, and 144 dense GDN projections.

# recipe.yaml
default_stage:
  default_modifiers:
    QuantizationModifier:
      targets: [Linear]
      ignore:
        - lm_head
        - re:.*visual.*
        - re:.*mtp.*
        - re:.*linear_attn[.]in_proj_a$
        - re:.*linear_attn[.]in_proj_b$
      scheme: W8A16

Quantization fidelity: KLD versus the BF16 source

[!IMPORTANT] This section measures checkpoint-weight quantization. It is not a BF16-versus-FP16 benchmark and it does not measure the FP8 KV cache. The teacher is always the original BF16 checkpoint.

For every teacher-forced next-token position, the metric is the KL divergence from the BF16 teacher distribution to the candidate distribution, D_KL(p_BF16 ‖ p_candidate), computed over the full 248,320-token vocabulary, in nats/token, with FP32 log_softmax and accumulation. No sampling or top-k approximation is involved.

Overall results

The apples-to-apples weight comparison is official FP8/BF16-A16 versus this W8/BF16-A16. The FP16-A16 row covers the alternative --dtype float16 serving profile; its lower value is prompt-suite-specific rounding cancellation, not evidence that FP16 is generally more accurate.

On RTX 3090, Transformers dequantizes the official checkpoint's stored FP8 weights to BF16 because native dynamic-FP8 activation execution is unavailable. The comparison therefore isolates stored-weight error under the same Hugging Face BF16 execution path; it does not represent native FP8 W8A8 execution on newer hardware.

Short-prompt suite

Long-context GDN probe

The probe used the first 4,096 tokenizer tokens of the upstream Qwen3.8 model card as cached locally, producing 4,095 scored positions.

The final seven positions are included in each overall mean but excluded from the equal-size window breakdown. KLD decreased rather than accumulated across this probe; no recurrent drift was observed at 4K tokens.

1. factual: The capital of France is Paris, and the capital of Japan is
2. code-fib:

   def fibonacci(n):
       if n < 2:
           return n
       return fibonacci(n - 1) + fibonacci(n - 2)
   
   # Rewrite with memoization to avoid exponential blowup, then add a
   # test that checks fibonacci(10) == 55 and fibonacci(0) == 0. Use a
   # dict as the cache and make the function private to the module.
   

3. physics-uncertainty: In quantum mechanics, the uncertainty principle states that the product of the uncertainties in position and momentum cannot be smaller than about half of the reduced Planck constant. More precisely, if many identically prepared particles are measured, the standard deviations of position and momentum satisfy the inequality derived by Kennard in 1927, which is a direct consequence of the non-commutativity of the position and momentum operators in Hilbert space.
4. math-train: A train travels 240 kilometres in 3 hours and 15 minutes, stopping for 10 minutes at one station along the way. What is its average speed in kilometres per hour? Show your calculation step by step, and state whether the stop changes the average speed.
5. sql-top5: Write a SQL query that returns the top five most frequently ordered products, joining the orders table with the products table on product_id, grouping by product id, and ordering by the count descending. Then explain what index would make the query faster and why a correlated subquery would be a worse choice here.
6. narrative-clock: Once upon a time, in a quiet village at the edge of a dark forest, there lived an old clockmaker who had never once repaired a clock that was broken on purpose. Each morning he wound every clock in the village square, and each evening he listened to them tick together like a heartbeat that the forest itself had learned to trust.
7. instruction-stack: Explain the difference between a stack and a queue, and give one real-world example of each. Keep the answer under one hundred words and use the words push, pop, enqueue, and dequeue exactly once each.
8. history-industrial: The Industrial Revolution began in Britain in the late eighteenth century. Three factors that made this possible were the abundance of coal and iron ore, a stable legal system that protected patents and contracts, and a network of navigable rivers and canals that lowered the cost of moving raw materials and finished goods.

• Run locally on 2026-08-14 with identical teacher-tokenizer IDs.
• BF16 teacher snapshot: 1d4bf0f2ff6012fd82039f2fa52739d0dd7c60c0.
• Official FP8 snapshot: 017b9c7af6b5689d5dd426a76e0bc077eb5ca20a.
• Environment: 2×RTX 3090, PyTorch 2.11.0+cu128, Transformers 5.10.1, compressed-tensors 0.17.1.
• Teacher and candidates used the same 69-module device map.
• These are Hugging Face decompressed-path logits, not vLLM Marlin or native-FP8 kernel logits.
• use_cache=False: the serving configuration's FP8 KV-cache error is not included.
• No scheduling, sampling, image, or context beyond 4,096 tokens was measured.
• Teacher logits were cached as FP16 before the shared FP32 KLD calculation, introducing a small common precision floor.

KV-cache rationale: E4M3 versus E5M2

--kv-cache-dtype controls runtime attention-cache storage. It does not alter this checkpoint's INT8 weights. E4M3 and E5M2 both consume one byte per cached value, so this decision affects numerical behavior—not memory capacity.

E4M3 is the default because attention K/V values generally benefit more from its additional mantissa bit than from E5M2's extreme range.

[!WARNING] Runtime compatibility is verified; long-context KV accuracy is not. The checkpoint declares kv_cache_scheme: null, so it contains no dataset-calibrated K/V scales. The KLD measurement above uses no cache, and no saturation probe was performed.

E5M2 remains the fallback if measured ranges or a future vLLM build expose E4M3 saturation or kernel incompatibility. The higher-value follow-up is an A/B of E4M3 with default scale 1.0, runtime-calculated scales, and dataset-calibrated scales—not an unmeasured dtype switch.

Serving

GPU interconnect profiles

The validated command below targets stock-driver dual-GPU systems without a working CUDA peer-to-peer path. Consumer Ampere P2P availability depends on the driver and host configuration; the physical PCIe topology alone does not establish that peer memory access works.

Verify the second profile with a CUDA peer-access test such as p2pBandwidthLatencyTest, not only nvidia-smi topo -m. Remove the two workarounds together: enabling vLLM's custom all-reduce while NCCL peer access remains disabled is not the intended profile. A patched driver changes the host execution path, not the checkpoint.

Recommended vLLM command

The reference llama-swap/podman deployment, minus the container plumbing, with two deliberately conservative flags: prefix caching is off by default (the reference enables it after applying the safety patch below) and the sequence cap is 2 (the reference runs 4). Rationale in the notes after the command.

export NCCL_P2P_DISABLE=1
export NCCL_CUMEM_ENABLE=0
export VLLM_WORKER_MULTIPROC_METHOD=spawn
export OMP_NUM_THREADS=1
export VLLM_USE_FLASHINFER_SAMPLER=0
export PYTORCH_CUDA_ALLOC_CONF=expandable_segments:True,max_split_size_mb:512

vllm serve lued/Qwen3.8-27B-INT8-W8A16-MTP \
  --served-model-name qwen3.8-27b-int8-w8a16 \
  --tensor-parallel-size 2 \
  --pipeline-parallel-size 1 \
  --dtype bfloat16 \
  --performance-mode balanced \
  --max-model-len 262144 \
  --gpu-memory-utilization 0.92 \
  --max-num-seqs 2 \
  --max-num-batched-tokens 8192 \
  --kv-cache-dtype fp8_e4m3 \
  --no-enable-prefix-caching \
  --enable-chunked-prefill \
  --mamba-cache-mode align \
  --prefix-match-unit 16 \
  --enable-prompt-tokens-details \
  --enable-per-request-metrics \
  --reasoning-parser qwen3 \
  --tool-call-parser qwen3_coder \
  --enable-auto-tool-choice \
  --disable-custom-all-reduce \
  --trust-remote-code \
  --default-chat-template-kwargs '{"enable_thinking":true,"preserve_thinking":true}' \
  --override-generation-config '{"temperature":1.0,"top_p":0.95,"top_k":20,"min_p":0.0,"repetition_penalty":1.0,"presence_penalty":0.0}' \
  --speculative-config '{"method":"mtp","num_speculative_tokens":3}'

NCCL_P2P_DISABLE=1 avoids NCCL initialization stalls on dual consumer GPUs without NVLink. --mamba-cache-mode align is required by the Qwen3.8 MTP/GDN serving path. Three speculative tokens is the measured default.

Prefix caching is off by default. On this hybrid GDN + MTP architecture, prefix caching without the 9-line source patch from vllm#48375 can corrupt recurrent-state KV, which surfaces as wrong tool-call or long-context output rather than an error. The reference deployment applies that patch at container start (along with this repository's chat_template.jinja via --chat-template), which is what lets it run with --enable-prefix-caching. If you apply the same patch, flip this flag back on; the published numbers were measured with a cold cache, so either setting leaves the table valid.

Concurrency is capped at 2, not 4, on this engine pin. Two or more concurrent requests can intermittently crash the engine (asynchronous cudaErrorIllegalAddress in the GDN spec-decode state path; same class as vllm#37431). The targeted fix is vllm#50021, which is open and awaiting its merge as of this writing; a vLLM release containing it should restore --max-num-seqs 4. Until then, a crashed engine drops in-flight requests and the service (llama-swap, podman, or a process manager) restarts it; if that is unacceptable, lower the cap to 1, which is the fully validated configuration on this pin.

MTP acceptance

MTP acceptance is workload-, sampling-, and draft-depth-dependent; it is not directly comparable across different models or benchmark prompts. With this checkpoint and three draft tokens on the vLLM pin above, per-window draft acceptance ranged from 42.1% to 92.4% across ten-second engine windows (including warmup), and overall draft acceptance was 65.5% (accepted/drafted) in the single-stream 8K/1,024 run.

The MTP checkpoint and lm_head are already BF16. Requantizing them cannot improve alignment. Increasing num_speculative_tokens adds progressively less accurate draft positions and normally lowers the reported average acceptance rate; lowering it can raise that percentage while reducing useful speculative work. The serving decision must therefore use end-to-end output throughput, not acceptance alone. Keep num_speculative_tokens=3 unless a controlled throughput test on the intended workload shows a better setting.

Operational notes

Files and provenance

Acknowledgements and license

This repository repackages numerical weights derived from Qwen/Qwen3.8-27B. It does not claim authorship of the base model, architecture, training data, or upstream evaluations. Header styling and the Qwen logo follow the official Qwen repositories.

Apache-2.0 for this packaging. Respect all upstream model terms and attribution requirements.